![\"ricardo](\"https:\/\/www.sustainable-bus.com\/wp-content\/uploads\/2020\/12\/ricardo_idrogeno_electric_motor_news_01.jpg\")
\nRicardo is working with London South Bank University in a project addressed at development of an innovative method of storing hydrogen on fuel cell buses. The research project will focus on the feasibility of replacing high pressure tanks with metal\u00a0hydride, which absorbs and then releases hydrogen from its surface, thus removing the need for and cost of high-pressure cylinders.<\/p>\n\n
Today on vehicles hydrogen is typically stored as a compressed gas at high pressure.\u00a0Under the research project carried on by Ricardo, an\u00a0engineering and environmental consultancy specialised in the transport, energy and scarce resources sectors,\u00a0with London South Bank University, which has received funding through Innovate UK under the Sustainable Innovation Fund (SBRI Phase 1), the use of hydrogen storage will be investigated for use in buses under a new concept<\/strong>. This storage method works by using metal hydride which absorbs and then releases hydrogen from its surface, thus removing the need for and cost of high-pressure cylinders. \u00a0A further benefit of using metal hydride storage is that the processes of releasing the hydrogen can be controlled and storage pressures significantly reduced – making storing hydrogen much safer and with lower operational and maintenance costs, according to Ricardo.<\/p>\n Ricardo engineers have been asked to support the project due to their expertise in vehicle thermal management and re-using waste heat, which can be useful in reducing the energy needed to help release the hydrogen from storage ready for capture.\u00a0A further potential benefit that Ricardo engineers and their university colleagues will investigate in the project is the possibility of using the metal hydride storage system to provide the bus\u2019s cabin with cooling power<\/strong>, which will reduce power consumption and improve the comfort of the bus driver.<\/p>\n Ricardo is supporting the London South Bank University with design and analysis for three months and will prepare the second phase of the project which is aimed at developing a prototype.<\/p>\n","protected":false},"excerpt":{"rendered":" Ricardo is working with London South Bank University in a project addressed at development of an innovative method of storing hydrogen on fuel cell buses. The research project will focus on the feasibility of replacing high pressure tanks with metal\u00a0hydride, which absorbs and then releases hydrogen from its surface, thus removing the need for and […]<\/p>\n","protected":false},"author":1,"featured_media":11700,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[341,337],"tags":[],"acf":[],"yoast_head":"\nMetal hydride storage for cooling the bus<\/h2>\n